Carbon Steel Welded Elbow for Construction, High-Pressure & Corrosion Enquiry
For industrial sourcing
Prepare a clearer RFQ
Include the details below so RELIA can understand the part and discuss the next step with you.
- Drawing, sample, or reference standard
- Material grade and preferred process
- Dimensions, tolerances, and surface finish
- Application, target quantity, and destination
Production timing, packing, and shipping terms are confirmed for each project after specifications and trade terms are agreed.
-
warranty3 Yearscustomized supportOEM, odm
-
TechnicCASTINGConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall Length1/4-4 inchHeight1/4-4 inch
-
Surface Treatmentblack paintPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameter22mm-42mm
-
Pipe FeaturesCorrosion resistant, high pressure resistantPipe ClassNot Rated
-
ApplicationOtherThread TypesNO
This carbon steel elbow enquiry concerns welded construction connections and pressure or corrosion requirements. Three actual selections pair diameter labels of 22 mm, 25 mm or 32 mm with a thickness of 3 mm. Confirm full bend geometry and material before assessing the joint for service.
Turn the diameter and thickness pair into a bend drawing
Establish whether the stated diameter is nominal or outside diameter. Define both end bores, wall tolerances, bend angle, radius, center-to-end dimensions and orientation. Equal construction needs accepted dimensions at both ends; the metric pair alone does not establish a complete elbow.
The 1/4-inch to 4-inch length and height ranges do not specify measured geometry for each selection. Confirm whether the 22–42 mm mounting-hole entry applies to the ordered part. It does not create additional available variants. Photographs support form comparison without certifying dimensions, grade or manufacture.
Accept the casting, welded ends and black-paint system
Carbon Steel is the actual material choice; stainless wording does not provide another selectable material. Request the exact specification, grade and traceable certificate, plus manufacturing and inspection records supporting the casting requirement.
Agree end preparation, pipe-wall matching, welding procedure and inspection acceptance. No thread form is specified. Hexagon wording does not define the whole elbow shape. For black paint, accept preparation, coating chemistry, thickness and exposure suitability rather than treating color as performance evidence.
Require documented pressure capacity and compatibility
High-pressure and corrosion-resistance requirements need a governing rating basis and supporting material, joint and coating evidence. No certified pressure-temperature envelope is supplied. Assess medium composition, operating temperature, pressure cycles and exposure conditions for the complete welded connection.
Send the selected diameter/thickness pair, accepted bend drawing, grade certificate, casting and welding requirements, paint specification, inspection criteria and full duty. Corrosion resistance must be assessed for the intended environment rather than assumed for every fluid or installation.
Technical information for every product inquiry
Prepare the requirement before final product confirmation.
The product page is a starting point. Drawings, samples, interfaces, materials, quantities and acceptance requirements are reviewed before stock matching or custom production is confirmed.
Discuss this product in your project context.
Share the available drawing, sample, reference, target quantity and application information. Unknown items can remain open for review.
