Spring Isolator Candidates for Multi-Site HVAC Fan Installation
RELIA compares spring-isolator candidates by fan, support load and installation arrangement, then keeps every site on a defined delivery schedule.
For HVAC fan projects across several sites, we can compare spring-mount candidates against the load and installation at each position. The catalog includes fan spring-mount examples and HVAC spring-floor examples. Different sizes must be selected against each site's load and mounting arrangement, not from the shared product family name.
We can organize your purchase by fan and site, so each support point receives a separately identified candidate size. That is more useful to an installation crew than one carton labeled simply HVAC spring mounts, especially when floor and suspended layouts differ.
Each Site Is Its Own Equipment Case
Record fan model, operating weight, support points and installation location for each project. Our rubber and spring mount listings can be compared site by site, so you can see which forms warrant a trial for each fan.
Approval at one site does not carry to another structure or machine. Your project schedule is the basis for a useful supply range.
Floor and Suspended Installations Differ
A floor-mounted isolator and a hanger occupy different support paths. The linked examples start a floor-mount discussion.
Tell us if any fan is suspended so that a different catalog family can be considered. Do not substitute one installation form based on a similar spring appearance. Use the spring isolator range to compare candidate forms after classifying each fan as floor-supported or suspended.
Supported Load Must Be Known Per Point
Provide the working load and distribution across supports. Spring selection without that information cannot support a credible recommendation. Our load and deflection guide explains the technical basis. Include any site-specific start-up, shutdown or restraint concerns identified by the project engineer. The equipment isolator guide helps you describe different fan support points when several sites use different frames.
Space and Connections Limit the Candidate
Measure available height, base footprint, fixing pattern and clearance to nearby equipment. The public product title does not supply an approved site dimension. An installer needs the proposed mount to fit the physical space as well as the intended load.
Fan Performance Needs a Trial Basis
Our mount listings help narrow a form for each fan, while your trial needs a named operating load, speed and measurement position.
Ask for technical data matching the proposed configuration, then compare the installed result with your site's vibration or acoustic target. No catalog link by itself proves a particular reduction percentage for your fan.
Site Packs Need Clear Identification
If several locations are supplied together, identify isolators by site, fan and support position. Mixed sizes without this mapping can create installation mistakes. Packing and labeling options should be confirmed in the order response, not assumed from catalog breadth.
Every Fan Site Gets Its Own Mount and Delivery Plan
For your spring isolator, the supported load, installation form, movement and evaluation method guide the selection and release.
Each site line needs the fan reference, load at each support, installation form, attachment, proposed isolator, quantity, evidence request and required date.
RELIA manufactures spring isolators and combined supports in its own factory. Typical project ranges are 50–5,000 kg per unit, 5–50 mm deflection and approximately 5–20 Hz natural frequency, supported by a dedicated spring load test bench.
Typical support capability is 50–5,000 kg per unit, 5–50 mm working deflection and approximately 5–20 Hz natural frequency. Special loads up to 20,000 kg per unit can be assessed.
Before release, keep the selected isolator, supported load, installation arrangement and project test record together. Review the company profile or request the current ISO certificate copies.
Send a Fan-by-Fan Schedule
Send each fan's weight, support arrangement, required dimensions, operating condition, destination and project date. Mark floor and suspended installations separately. Share these details with us for a practical spring-isolator enquiry.
