ASTM A234 WP5 DN125 7D Carbon Steel Pipe Bend Enquiry
For industrial sourcing
Prepare a clearer RFQ
Include the details below so RELIA can understand the part and discuss the next step with you.
- Drawing, sample, or reference standard
- Material grade and preferred process
- Dimensions, tolerances, and surface finish
- Application, target quantity, and destination
Production timing, packing, and shipping terms are confirmed for each project after specifications and trade terms are agreed.
-
warranty1 yearcustomized supportOEM, ODM
-
model numberbend 3079TechnicCasting
-
ConnectivityMale/FemaleshapeEqual/Reducing
-
head codeHexagon/RoundSurface TreatmentPainting
-
Mounting hole diameter0.26 inPipe Class150
This ASTM A234 WP5 DN125 7D pipe-bend enquiry is associated with model bend 3079. Agree a material specification and dimensioned drawing before ordering. Title references do not independently certify grade, nominal-size availability, radius convention or numerical service capability.
Resolve material and DN125 selection first
Ten actual Bend variants combine each 10 mm, 12 mm, 14 mm, 50 mm and 30 mm label with Stainless Steel or Carbon Steel. Define the chosen label's nominal or measured meaning and its relationship to DN125. Do not assume these choices prove equivalent dimensions or availability of the title size.
Specify exact material designation, grade, condition, governing document and edition, with traceable inspection records. Assign WP5 requirements to the intended supplied component. Neither the carbon-steel title nor the two material alternatives establish that every selection meets that named specification.
Turn the 7D reference into an approved drawing
Define the radius convention and reference diameter explicitly. Include bend angle, centerline radius, tangent lengths, outside diameters, wall thickness, end preparation and required tolerances. The photographs show curved forms with different end appearances; they cannot establish a measured radius ratio, angle, grade or internal construction.
Choose the actual Equal/Reducing inlet/outlet arrangement. Tie Male/Female and Hexagon/Round wording to accepted end geometry rather than assuming a thread or socket configuration. The separate 0.26-inch mounting-hole entry cannot define the bore or complete attachment dimensions.
Agree manufacturing evidence and installed duty
Clarify the supplied manufacturing route and relevant conformity/inspection evidence for the Casting reference. Define painting preparation, coverage and end-surface exclusions. Class 150 requires its governing material-temperature basis. Provide medium, pressure, temperature, cycling, loads and connected pipe dimensions; agree joint acceptance, installation, marking/traceability, OEM/ODM work and stated one-year warranty terms.
Technical information for every product inquiry
Prepare the requirement before final product confirmation.
The product page is a starting point. Drawings, samples, interfaces, materials, quantities and acceptance requirements are reviewed before stock matching or custom production is confirmed.
Discuss this product in your project context.
Share the available drawing, sample, reference, target quantity and application information. Unknown items can remain open for review.
