Carbon Steel Cast Welded Elbow for High-Pressure Enquiry
For industrial sourcing
Prepare a clearer RFQ
Include the details below so RELIA can understand the part and discuss the next step with you.
- Drawing, sample, or reference standard
- Material grade and preferred process
- Dimensions, tolerances, and surface finish
- Application, target quantity, and destination
Production timing, packing, and shipping terms are confirmed for each project after specifications and trade terms are agreed.
-
warranty3 Yearscustomized supportOEM, odm
-
TechnicCASTINGConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall Length1/4-4 inchHeight1/4-4 inch
-
Surface TreatmentblackPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameter22mm-42mm
-
Pipe FeaturesCorrosion resistant, high pressure resistantPipe ClassNot Rated
-
ApplicationOtherThread TypesNO
This carbon steel elbow enquiry presents casting, welding, black surface and corrosion-resistant wording for a requested high-pressure application. Six actual choices pair diameter and thickness: 22mm/3mm, 25mm/3mm, 32mm/3mm, 42mm/4mm, 48mm/5mm and 60mm/5mm. Accept the exact bend geometry and documented duty for the chosen pair.
Turn the paired metric choice into a complete elbow drawing
Confirm whether the quoted diameter means outside diameter, bore or another basis. Establish tolerances, bend angle, radius, center-to-end dimensions and required wall through the bend. The paired metric wording does not independently identify a nominal DN, NPS or pipe schedule.
Generic length and height ranges and the mounting-hole label cannot replace a selected drawing. Open-ended bent examples in the photographs support visual enquiry but do not certify an angle, radius, selected diameter/thickness combination, carbon steel grade or manufacturing route. Obtain matching supplied-product identification.
Define actual welded ends and the black surface
The table identifies welding and no thread type. Confirm actual weld preparation, mating pipe-wall compatibility and joining inspection for both ends. Request the exact carbon steel material specification, grade, heat-traceable certificate and accepted manufacturing and inspection records for cast supply.
Black describes appearance without identifying coating chemistry, film thickness or a corrosion allowance. Set the required surface acceptance and protection system for the actual exposure. Corrosion-resistant wording alone does not establish compatibility with the proposed medium, cleaning process or external environment.
Document pressure acceptance for the installed bend
A high-pressure enquiry still needs a certified pressure-temperature basis; the retained Not Rated label supplies no operating limit. Assess actual medium composition, temperature, pressure cycles and the complete welded joint under an accepted governing specification. Send the exact diameter/thickness choice, angle and radius, end drawing, grade and manufacturing documents, surface requirements, full duty and inspection criteria before installation acceptance.
Technical information for every product inquiry
Prepare the requirement before final product confirmation.
The product page is a starting point. Drawings, samples, interfaces, materials, quantities and acceptance requirements are reviewed before stock matching or custom production is confirmed.
Discuss this product in your project context.
Share the available drawing, sample, reference, target quantity and application information. Unknown items can remain open for review.
