A53 Concentric / Eccentric Swage NPT Nipple | Grade B Enquiry
For industrial sourcing
Prepare a clearer RFQ
Include the details below so RELIA can understand the part and discuss the next step with you.
- Drawing, sample, or reference standard
- Material grade and preferred process
- Dimensions, tolerances, and surface finish
- Application, target quantity, and destination
Production timing, packing, and shipping terms are confirmed for each project after specifications and trade terms are agreed.
-
warranty1 yearscustomized supportOEM
-
model numberDN8- DN300TechnicForged
-
ConnectivityWeldingshapeEqual
-
head coderoundSurface TreatmentSmooth
-
PressureLow PressureMounting hole diameter0.25 in
-
Pipe Class1000PassAPI
-
CertificationGS
A swage nipple enquiry should define the transition between two pipe ends, including their sizes, alignment and connection preparation. For an NPT connection and Grade B requirement under A53, those details need to be recorded for the selected item. Specify the geometry you need and request a drawing that connects the dimensional and material requirements in one fitting specification.
Define the Swage Geometry at Both Ends
State the required large and small end sizes, their wall thicknesses and the overall fitting length. Identify whether the transition must be concentric or eccentric. For an eccentric requirement, show the alignment and any relevant orientation on the drawing. A single pipe-size label does not define both ends of a swage. Compare the proposed dimensions with the two adjoining pipes so that the intended transition is clear.
Identify NPT and Welding Preparation Separately
If the required connection is NPT, specify the thread form and extent at each end and obtain the corresponding end detail. If a welding connection is required, define that end preparation instead. Describe mixed end arrangements individually where needed. Do not treat a thread description and a welding description as equivalent configurations. The selected-item drawing should identify how each end will join its mating pipe.
Confirm Material and Operating Requirements
State the exact Grade B material requirement under A53 and request traceable material documentation for the proposed nipple. Confirm the manufacturing process separately and identify the applicable standard scope. Name the process medium and record the pressure and service-temperature requirements before requesting operating qualification. Complete the enquiry with one geometry, an end-size pair, wall thicknesses, connection details and material records. This gives a defined basis for assessing the fitting against the installation and service conditions.
Technical information for every product inquiry
Prepare the requirement before final product confirmation.
The product page is a starting point. Drawings, samples, interfaces, materials, quantities and acceptance requirements are reviewed before stock matching or custom production is confirmed.
Discuss this product in your project context.
Share the available drawing, sample, reference, target quantity and application information. Unknown items can remain open for review.
