90 Degree Carbon Steel SCH80 B16.9 Pipe Elbow Enquiry
For industrial sourcing
Prepare a clearer RFQ
Include the details below so RELIA can understand the part and discuss the next step with you.
- Drawing, sample, or reference standard
- Material grade and preferred process
- Dimensions, tolerances, and surface finish
- Application, target quantity, and destination
Production timing, packing, and shipping terms are confirmed for each project after specifications and trade terms are agreed.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
A 90-degree pipe elbow enquiry should establish the required change in pipe direction together with the dimensions of the selected fitting. Confirm the exact nominal size and its relationship to the mating pipe before evaluating wall schedule or material requirements. Keep the drawing, material records and quotation linked to one elbow configuration.
Establish the Bend and Installation Geometry
Specify the required elbow angle and bend radius, then request centre-to-end dimensions and end geometry. Compare the drawing with the available installation space and the alignment of both pipe sections. Where the project calls for a three-quarter-inch fitting, confirm the nominal-size convention and corresponding pipe outside diameter rather than assuming an equivalence with a millimetre option. These dimensions establish whether the proposed elbow can be incorporated into the planned pipe route.
Define SCH80 Walls and the Steel Specification
State the schedule convention and obtain the actual wall thickness for the selected nominal size and exact steel grade. Include the required material designation and weld-end preparation at both connections. If seamless construction is part of the specification, request production evidence identifying the manufacturing route of the quoted item. Define any surface-treatment requirement separately; the visible surface does not establish steel grade, fabrication history or coating performance.
Verify the B16.9 and Operating Design Scope
Identify the applicable B16.9 edition and the conformity evidence required for the selected elbow. Describe the fluid, operating pressure and temperature, and provide the joint and fabrication requirements for the completed line. A wall-schedule label or isolated class number cannot replace a documented pressure-design basis. Use the final dimensional drawing, material and manufacturing records, joint detail and qualified service limits to complete the elbow review before deciding whether it meets the intended application.
Technical information for every product inquiry
Prepare the requirement before final product confirmation.
The product page is a starting point. Drawings, samples, interfaces, materials, quantities and acceptance requirements are reviewed before stock matching or custom production is confirmed.
Discuss this product in your project context.
Share the available drawing, sample, reference, target quantity and application information. Unknown items can remain open for review.
