ASME B16.5 Class 150 RF Carbon Steel Socket-Weld Flange Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty12 monthscustomized supportOEM, ODM, OBM
-
model numberA105TechnicForged
-
ConnectivityWeldingshapeEqual
-
head codeRoundOverall Length4 in
-
Height3Surface TreatmentSmooth
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.25 inPipe Featuresunderground rated, No additional Features, Uv Resistant, Chemical Resistant
-
Pipe Class150ApplicationShipbuilding, Construction Engineering, Power Industry, Heating Systems
-
Thread TypesNPT
This socket-weld flange enquiry combines class 150 RF and ASME B16.5 requirements with a carbon steel material request. Confirm the selected flange's socket, facing and bolted interface before evaluating it for the piping connection. The enquiry should define the pipe attachment as clearly as the mating flange arrangement.
Describe the socket and adjoining pipe
Provide the pipe outside diameter and wall thickness, then request the socket bore and depth for the required flange. Identify the intended attachment arrangement and the details needed by the joining procedure. Check these features on a drawing for the selected component. An open bore in a general flange image does not establish the required socket geometry or the dimensions needed to connect a particular pipe.
Verify the raised face and class designation
State the required ASME B16.5 edition and class 150 designation. Obtain the RF facing dimensions, flange thickness, outside diameter and complete bolt pattern on the same drawing. Compare the flange with the mating part, gasket and fasteners. Keep the pressure designation within the applicable standard rather than assuming that a similarly shaped flange or a different standard marking establishes the same joint specification.
Confirm the selected material and operating scope
Specify the exact Carbon Steel requirement and ask for confirmation of the A105 designation where it is required. A Stainless Steel option needs its own material specification and review. Request the actual construction and pressure-temperature documentation for the selected size and material. Include the medium and design conditions with the enquiry so the joint can be assessed as a complete configuration. Before acceptance, confirm the socket connection, raised face, bolting and material scope together against the project drawing.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
