Large-Diameter Steel Blind Flange for Petrochemical Plants
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This petrochemical plant listing describes a large-diameter steel blind flange with an ASME B16.47 Series A reference and a Polished surface. The actual component needs a selected nominal size, material and closure drawing. Confirm those details before using the broad listing range as a purchase specification.
Define the large-diameter closure drawing
Specify the nominal size and required Series A drawing under the applicable standard edition and scope. The shared 1/2–120 inch range does not establish that one standard covers every listed size or that every material and class combination is available. Obtain confirmation for the exact component.
Check facing, thickness, bolt circle, hole count and diameter against the mating flange and closure requirements. Four half-inch holes appear in the table, but should not be applied automatically to a large-diameter design. Do not assume interchangeability with another series or flange standard without the dimensional review.
Select the steel and face acceptance criteria
Alloy Steel, Carbon Steel and Stainless Steel blind options are selectable. Choose the actual grade, condition and required traceability for the intended service instead of treating generic steel names as complete material specifications. Aluminum options are separate choices and do not inherit the steel description.
Polished does not identify a measured face roughness or establish gasket and mating-face acceptance. Agree finish criteria and inspection requirements on the selected drawing. Request the material and dimensional records required by the purchase specification, including the evidence supporting the stated standard reference.
Review the petrochemical closure duty
Describe the fluid, concentration, contaminants, pressure, temperature, cycles and loads affecting the closure. Establish the actual material-dependent pressure-temperature and joint requirements under the plant specification. The application wording supplies no blanket chemical compatibility approval. Confirm inspections, marking, preservation, availability, quantity and delivery for the selected steel blind flange.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
