304L Weld Neck Flange for Water Treatment
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This water treatment machinery listing describes a stainless steel weld neck flange with 304L and EN 1092-1 Type 11 references. It also uses ANSI Certified wording. Confirm the actual material package, selected drawing and any required certification evidence before accepting those title references for the project.
Match the neck and weld preparation
The Stainless Steel weld neck option is selectable, but the pipe connection still needs a specific drawing. Define nominal size, bore and pipe match, neck geometry and weld preparation, along with facing and thickness. Review the welding and inspection requirements under the machinery or piping specification.
Check the complete drilling pattern against the mating flange. Four half-inch holes are listed in the table and require confirmation for the chosen size. The shared 1/2–120 inch range does not establish one drawing, one standard scope or availability of every material and flange configuration.
Request material and certification evidence
Obtain records supporting grade 304L, with the required condition and traceability. The generic Stainless Steel option does not independently establish that grade. Clarify the applicable edition, dimensions and pressure designation associated with the EN 1092-1 Type 11 reference for the actual component.
ANSI Certified wording does not provide a certificate, issuer or covered scope. If certification is required, request the actual document and assess it against the purchase requirements. Do not assume dual-standard interchangeability or a pressure rating from the combined title. Agree the finish criteria beyond Polished.
Describe the machinery water service
Provide water chemistry, treatment chemicals, contaminants, temperature, pressure, cycles and relevant equipment loads. Assess the selected material and joint for those conditions without assuming potable-water approval or corrosion immunity. Confirm material, dimensional, weld-preparation and finish inspections, required records, marking, preservation and delivery timing for the chosen weld neck flange.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
