ASME B16.5 A105 Carbon Steel Blind Flange Class 300, CNC Machined
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
Surface TreatmentCNC MachinedApplicationConstruction
-
Bolt Hole Diameter1/2"~24"Bolt Hole Quantity6
The ASME B16.5 A105 carbon steel Class 300 blind flange enquiry concerns a closure for a machinery pipe joint. Start with the selected blind geometry and mating assembly so the closure, gasket and fasteners can be assessed together.
Specify the blind closure and selected size
A blind flange requires accepted solid closure geometry, thickness, facing and gasket contact dimensions. Confirm the supplied construction explicitly: the twelve actual variants also include weld-neck, slip-on, socket-weld, lap-joint and threaded forms in Carbon Steel or Stainless Steel.
The shared 1/2"~24" size range does not establish discrete available sizes. Two viewed images show a solid blind flange alongside open-bore constructions. These references help distinguish shapes without proving the selected closure's dimensions, grade or pressure class.
Verify drilling instead of assuming six holes
Obtain outside diameter, thickness, facing type and finish, bolt circle, hole quantity, hole diameter and tolerances on the accepted drawing. Six-hole wording and the table quantity 6 cannot establish drilling for every size in the offered range. The repeated Bolt Hole Diameter range also cannot substitute for a measured hole dimension.
Agree the applicable B16.5 edition, scope and selected Class 300 compliance basis. Class 300 is not one constant operating pressure; material and temperature must be considered when accepting the complete joint envelope.
Accept A105 evidence and machinery service
A105 requires the selected carbon steel specification, product form, condition and traceable material/inspection documents. It cannot certify a stainless alternative. CNC-machined surfaces do not independently prove dimensional tolerance, heat treatment or corrosion performance.
For machinery or construction duty, identify medium composition, pressure, temperature, cycling and closure loads. Supply the exact blind/interface drawing, material records, standard/class evidence, surface requirements and mating gasket/fastener details. Evaluate these requirements together before accepting interchangeability or the installed operating conditions.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
