Large-Diameter Steel Blind Flange for Petrochemical Plants
Pour l’approvisionnement industriel
Préparez une RFQ plus claire
Indiquez les éléments ci-dessous afin que RELIA comprenne la pièce et discute avec vous de la prochaine étape.
- Plan, échantillon ou norme de référence
- Nuance du matériau et procédé préféré
- Dimensions, tolérances et finition de surface
- Application, quantité cible et destination
Délais de production, emballage et conditions d’expédition sont confirmés pour chaque projet après accord sur les spécifications et conditions commerciales.
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This petrochemical plant listing describes a large-diameter steel blind flange with an ASME B16.47 Series A reference and a Polished surface. The actual component needs a selected nominal size, material and closure drawing. Confirm those details before using the broad listing range as a purchase specification.
Define the large-diameter closure drawing
Specify the nominal size and required Series A drawing under the applicable standard edition and scope. The shared 1/2–120 inch range does not establish that one standard covers every listed size or that every material and class combination is available. Obtain confirmation for the exact component.
Check facing, thickness, bolt circle, hole count and diameter against the mating flange and closure requirements. Four half-inch holes appear in the table, but should not be applied automatically to a large-diameter design. Do not assume interchangeability with another series or flange standard without the dimensional review.
Select the steel and face acceptance criteria
Alloy Steel, Carbon Steel and Stainless Steel blind options are selectable. Choose the actual grade, condition and required traceability for the intended service instead of treating generic steel names as complete material specifications. Aluminum options are separate choices and do not inherit the steel description.
Polished does not identify a measured face roughness or establish gasket and mating-face acceptance. Agree finish criteria and inspection requirements on the selected drawing. Request the material and dimensional records required by the purchase specification, including the evidence supporting the stated standard reference.
Review the petrochemical closure duty
Describe the fluid, concentration, contaminants, pressure, temperature, cycles and loads affecting the closure. Establish the actual material-dependent pressure-temperature and joint requirements under the plant specification. The application wording supplies no blanket chemical compatibility approval. Confirm inspections, marking, preservation, availability, quantity and delivery for the selected steel blind flange.
Informations techniques pour chaque demande produit
Préparez le besoin avant la confirmation finale du produit.
La page produit est un point de départ. Plans, échantillons, interfaces, matières, quantités et réception sont examinés avant confirmation du stock ou de la fabrication.
Discutez de ce produit dans le contexte de votre projet.
Partagez plan, échantillon, référence, quantité et application. Les points inconnus peuvent rester ouverts.
