RF WN Flange Enquiry | B16.5 or EN1092-1, F304 or A105 Requirements
Pour l’approvisionnement industriel
Préparez une RFQ plus claire
Indiquez les éléments ci-dessous afin que RELIA comprenne la pièce et discute avec vous de la prochaine étape.
- Plan, échantillon ou norme de référence
- Nuance du matériau et procédé préféré
- Dimensions, tolérances et finition de surface
- Application, quantité cible et destination
Délais de production, emballage et conditions d’expédition sont confirmés pour chaque projet après accord sur les spécifications et conditions commerciales.
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model numberflange 4103TechnicForged
-
ConnectivityWeldingshapeEqual
-
head codeHexagonSurface TreatmentSmooth
-
Mounting hole diameter0.25 inPipe Class1000
-
ApplicationAgricultural Irrigation, Automotive Repair, Heating Systems
This RF weld-neck flange enquiry brings together dimensional standard, material and pressure-designation requirements that must be selected for one configuration. Identify whether the project calls for ASME B16.5 or EN1092-1, then define the applicable material and joint geometry. The enquiry should establish a clear specification without assuming that different standard systems describe an interchangeable flange.
Choose the standard and its pressure designation
State the required dimensional standard and edition on the project drawing. Define the pressure designation within that standard and confirm PN16 only where it applies to the selected configuration. Request the corresponding facing, flange thickness and bolt-pattern dimensions. A designation from another system should not be treated as an equivalent operating rating without the applicable documentation and a complete mating-interface check.
Separate the F304 and A105 material requirements
Identify the A182 F304 requirement for the intended Stainless Steel configuration or the A105 requirement for the Carbon Steel configuration. Request material confirmation for that same flange and the required construction. These are separate material specifications, not a combined grade. General flange images may illustrate several forms and cannot establish the material or exact weld-neck construction of the selected component.
Match the neck and raised-face joint
Obtain a drawing showing the neck geometry, bore, pipe-end preparation, RF facing and complete bolted interface. Compare the neck end with the adjoining pipe and the flange face with the mating flange, gasket and fasteners. Include the medium, pressure and temperature when requesting the selected configuration's qualification records. Before acceptance, confirm that the standard, pressure designation, grade and drawing all describe the same flange. This keeps pipe attachment and joint compatibility tied to the actual material and operating scope.
Informations techniques pour chaque demande produit
Préparez le besoin avant la confirmation finale du produit.
La page produit est un point de départ. Plans, échantillons, interfaces, matières, quantités et réception sont examinés avant confirmation du stock ou de la fabrication.
Discutez de ce produit dans le contexte de votre projet.
Partagez plan, échantillon, référence, quantité et application. Les points inconnus peuvent rester ouverts.
