API 5L Carbon Steel Pipe for Natural Gas Pipelines
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
InvoicingBy Actual WeightOiled or Non-oiledNon-oiled
-
Section ShapeRoundSurface TreatmentHot Rolled
-
Tolerance±1%Alloy Or NotNon-Alloy
-
ApplicationFluid Pipe, Drill Pipe, Hydraulic Pipe, Gas Pipe, Oil PipeCertificateAPI , ISO 9001
-
Delivery Time8 ~ 14 daysGradecarbon steel
-
Outer Diameter219 - 1066 mmSpecial PipeAPI Pipe, Other, EMT Pipe, Thick Wall Pipe
-
StandardASTMTechniqueSaw
This API 5L carbon steel pipe is listed for natural gas pipelines, with galvanized, seamless, welding and bending terms in the original title. The table records hot-rolled, non-oiled carbon steel. Confirm which finish and manufacturing condition apply to the offered pipe before using those terms in a project specification.
Confirm galvanizing and the intended fabrication scope
Request the proposed zinc treatment method, coverage, coating thickness and acceptance records if galvanized supply is required. Hot-rolled surface and non-oiled condition do not establish that galvanizing has been applied. Define the relevant internal or external surfaces and any project inspection requirements for the selected finish.
Welding and bending wording does not provide an approved fabrication procedure or identify a supplied bend geometry. Submit the intended fabrication requirements for specific review, including joint acceptance, dimensional checks and treatment of affected coating. Obtain qualified project documentation rather than deriving a general installation method from this listing.
Choose grade and dimensions together
Gr B, X42, X52 and X60 are title references without grade-specific variants. The diameter range is 219–1066 mm; the two actual variants combine 6–20 mm thickness with 12 m or 6 m length. Specify one grade, diameter, wall and length, and confirm that precise supply combination.
Clarify the seamless description against the Saw technique field using manufacturing evidence. Agree end condition and the dimensional basis of the ±1% tolerance. Request the applicable API 5L edition, material records and exact ASTM document where relevant; API and ISO 9001 labels need actual certificate scope and validity.
Establish acceptance for the natural gas service
Identify gas composition, pressure, temperature, cycling and mechanical loads for review of the selected material, joints and rating. Agree project testing and traceability requirements. The natural gas application label alone establishes neither an operating pressure limit nor sour-service suitability, and fabrication approval remains specific to the chosen supply.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
