Carbon and Stainless Steel Concentric Reducer Specification Enquiries
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model number3TechnicForged
-
ConnectivityWeldingshapeEqual
-
head codeHexagonOverall Length4 in
-
Height7Surface TreatmentPainting
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.2 inPipe FeaturesUv Resistant, Chemical Resistant, Corrosion-resistant, Flexible, No additional Features, underground rated
-
Pipe Class150ApplicationAgricultural Irrigation, Automotive Repair, Heating Systems, Power Industry, Construction Engineering, Shipbuilding, petrochemical industry
-
Thread TypesNPTSizeCustomized Size
-
Product nameElbow
A concentric reducer request should define the alignment of the large and small pipe ends as well as their sizes. This product has Stainless Steel, Alloy and Carbon Steel choices; confirm the intended transition profile before selecting the material and connection details.
Show how the reducer centerlines must align
For a concentric requirement, state that the two pipe-end centerlines must coincide and show that arrangement on the drawing. If the layout instead needs an offset transition, define the required orientation separately. Confirm the supplied profile rather than treating a reference reducer image as proof of the requested alignment. The centerline relationship should be reviewed with the pipe route and the space available for the transition.
Specify the large and small ends independently
Provide both pipe-end dimensions, wall thicknesses and connection forms, with units and the required dimensional references. Include the transition length and any preparation needed at either end. One pipe-size label does not describe a complete reducing pair, while a general equal-end descriptor cannot establish the intended size change. Keep the two end requirements connected to the same profile drawing so the proposed reducer has a clear fit within the assembly.
Confirm construction for the selected material family
Name the grade required within the chosen steel family and identify any seamless or forging requirement for technical confirmation. The manufacturing requirement should apply to the same reducer dimensions and end arrangement being reviewed. Provide the medium and design conditions when requesting service suitability, with relevant material and inspection documentation. A broad class or resistance label does not qualify a specific reducer; the final request should connect alignment, transition length, both ends and material into one defined part.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
