HDPE Coated SAW Welded Steel Pipe for Chilled Water
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
InvoicingBy Actual WeightOiled or Non-oiledNon-oiled
-
Section ShapeRoundSurface TreatmentHDPE Coating
-
Tolerance±1%Alloy Or NotNon-Alloy
-
ApplicationFluid Pipe, Drill Pipe, Hydraulic Pipe, Gas Pipe, Oil PipeCertificateAPI , ISO 9001
-
Delivery Time8 ~ 14 daysGradeP235JH
-
Outer Diameter219 - 1066 mmProcessing ServiceWelding, Punching, Cutting, Bending, Decoiling
-
Special PipeAPI Pipe, Other, EMT Pipe, Thick Wall PipeStandardASTM
-
TechniqueSaw
This HDPE-coated SAW welded steel pipe enquiry covers chilled-water, gas and oil application contexts. The table names P235JH and Saw technique, with diameter and wall ranges rather than a selected configuration. Confirm the actual pipe, coating and service requirements before procurement.
Complete the P235JH pipe and SAW documentation
Request the full material designation, governing document and edition, condition, heat traceability and certificates. Generic ASTM wording does not identify a complete material or dimensional specification. Obtain the actual weld route, seam configuration and inspection requirements instead of assuming ERW or seamless manufacture.
Thickness options cover 6–20 mm with lengths 12 m or 6 m; the table lists outside diameter 219–1066 mm. Select actual dimensions and clarify whether diameter refers to steel or finished coating. Obtain bore, wall and accepted drawing, allocating ±1% to specific properties and inspection criteria.
Define HDPE coverage and the installed joint finish
Agree coating construction, internal/external coverage, preparation, thickness, adhesion or bonding criteria where applicable, and inspection. Specify end cutbacks, field-joint treatment, repair and protection during handling. The processing-service list does not establish every proposed operation on the selected coated pipe.
No thermal-insulation material or performance is recorded for this item. HDPE wording alone should not be treated as a condensation-control or insulation specification for chilled water. Confirm any additional required system layers separately, alongside current supplier identity and traceability records.
Assess chilled water, gas or oil individually
Provide actual medium composition, pressure, temperature, cycling, exposure, corrosion conditions and loads. Obtain acceptance for steel, welds, coating and joints in the selected service. Verify applicable API/ISO 9001 documents, then agree support, alignment, storage, testing, marking, material/weld/coating/dimensional records and quotation scope.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
