A105 Carbon Steel Tee for Water Supply
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPaintingPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This water supply tee listing identifies carbon steel and A105, with GOST and forged references. The original image shows a tee form, while the selectable type is labeled Reducer. Confirm which ordered component the drawing covers before using the listed range or accepting a material designation.
Resolve welded and BSPT end wording
The title includes both Welded and BSPT Threaded, whereas the table records Welding and gives no actual thread designation. These entries do not establish one supplied end arrangement. Request the end drawing, mating connection details and applicable inspection requirements for the selected component.
If threaded ends are requested, confirm the actual thread designation, dimensions, tolerances and mating interface. If welded ends are selected, agree the end preparation and joint requirements. Do not derive either arrangement from a generic size option or treat the two terms as interchangeable.
Identify the GOST and material scope
Specify the GOST number, edition and component coverage required for the project. An unnumbered standard reference does not demonstrate conformity. Obtain the supplied grade, condition and traceability documentation; the A105 title and a234wpb option do not themselves identify one certified material package.
Provide run and branch sizes, outside diameters, wall requirements, center-to-end dimensions and tolerances. Clarify the Equal and Hexagon fields against the actual drawing, and agree units despite the Metric table and inch-based range. Define the Painting treatment, covered surfaces and inspection acceptance separately.
Define the water system operating envelope
State water composition, treatment chemicals, contaminants, temperature, pressure, transients and external loads. High Pressure and Other class leave numerical limits unspecified. Check material and joint suitability for the actual system, including any required water-contact approval, then agree dimensional and end inspections, documentation, marking, preservation and delivery.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
