A105 Carbon Steel Tee for Fire Protection
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPaintingPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This carbon steel tee listing targets fire-protection piping and includes A105, ASTM and GOST references. The image supports a tee form, although the selectable type is labeled Reducer. Confirm the exact component and approved drawing before assigning its connection, material package or project acceptance status.
Settle the actual threaded or welded ends
The title specifies Threaded while the table records Welding. Its Thread Types field gives only Customized Size, so no actual thread designation or supplied end arrangement is established. Request the mating-interface drawing, dimensions and tolerances for the selected component before choosing a connection.
For a requested threaded arrangement, define the actual thread designation and inspection requirements. For welding, agree end preparation and joint acceptance. Confirm run and branch dimensions, bore, wall, center-to-end and any Hexagon features on the drawing. The broad size range does not provide these ordered values.
Clarify material and standard acceptance
Identify the exact ASTM and GOST requirements, editions and component scope needed for the project. Confirm how the A105 reference applies to the supplied fitting, with actual grade, condition, traceability and inspection records. Selectable carbon steel and a234wpb labels are not certificates of conformity.
The image contains printed markings, but they do not establish the material, dimensions or certification of the order. Obtain the actual production documentation supporting Forged. Specify Painting coverage, surface acceptance and coating inspection, and agree dimensional units rather than relying on the Metric and inch-range entries alone.
Confirm fire-system project requirements
Provide the actual system medium, pressure, temperature, transients, testing and joint requirements. High Pressure and Other class do not state numerical allowable limits. Establish any required fire-service listing or approval for the selected component, then agree material and end inspections, documentation, marking, preservation and delivery against the project acceptance criteria.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
