GOST 17376 Forged Butt-Welding Reducing Tee Pipe Fitting Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPlainPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This GOST 17376 forged butt-welding reducing tee enquiry needs an accepted document and supplied-item drawing. Establish the intended branch or transition arrangement before evaluating end fit, material acceptance or the complete pipe-system duty.
Define the applicable GOST document and geometry
Agree the document, edition, scope, dimensions, tolerances and compliance evidence. GOST naming alone cannot certify material, manufacture or operating capacity. Confirm the delivered subtype and actual run-to-branch relationship instead of treating reducing tee, equal tee and reducer as interchangeable forms.
Two actual variants are Reducer with Carbon Steel or a234wpb within a shared 1/2"-110" range. The range and customized-dimension entries cannot establish discrete available sizes or a measured assembly drawing. Obtain the identified supplied configuration.
Check the branch and every mating end
For tee supply, specify run/branch nominal sizes, all end diameters, bores, walls, orientation and center-to-end dimensions. For reducer supply, define both end sizes, transition arrangement and length separately. Confirm the measurement basis and welding-end preparation, fit-up and tolerances against the mating pipes.
Two viewed photos show bodies with smaller branches and different apparent sizes. They support visual comparison without certifying selected subtype, measured geometry, grade, GOST compliance or forging. Generic head-code wording cannot replace full pipe-end acceptance.
Accept material production and numerical service
Carbon Steel is not a grade certificate. The a234wpb option needs its accepted specification, grade, product form, condition and traceable inspection evidence. A material label does not establish equivalence with the GOST dimensional document. Forged wording requires actual production records.
High Pressure provides no numerical pressure-temperature envelope. Plain and Other labels do not establish corrosion resistance or service approval. Supply actual medium composition, pressure, temperature, flow/branch duty, cycling and loads with the accepted document, subtype/geometry, material/manufacture and joining evidence for technical evaluation.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
