Forged Carbon Steel Flanged Top-Entry Ball Valve Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
applicationGeneralConnection Typeflange
-
mediaBASEPort Size1/4in - 4in
-
structureControlmodel numberball valve
-
Connection Size1/4in - 4incustomized supportOEM, odm
-
Flow Rate0-100L/minFor Maximum Pipe Size4in(10.16cm)
-
Operating PressureLow PressureOperating Temp. Range0~150 Celsius
-
powermanualSealing MaterialPTFE
-
temperature of mediaMedium Temperaturewarranty1 year
A flanged top-entry ball-valve enquiry needs an identified model, a defined body specification and evidence of the requested internal arrangement. Use the carbon-steel and forged-construction requirements to describe the valve you need, then confirm the selected assembly against its own drawings. The information below helps organize that technical enquiry without assigning an unverified configuration to a particular size or option.
Establish the Top-Entry Assembly
Request a section drawing that identifies the valve mechanism and an assembly drawing that shows the proposed top-entry arrangement. Confirm which components can be accessed through that arrangement and the space needed around the installed valve. If ball-valve construction is essential to the application, have it identified on the selected-model documentation rather than relying on the external appearance alone.
Define Body Construction and Flange Fit
State the exact carbon-steel grade required for the body and obtain the corresponding material records. Identify the manufacturing process separately so that a forged-body requirement is clear. Body, ball and sealing components should each have their own specification. Match the flange facing, drilling, port and face-to-face dimensions to the mating pipeline drawing. Confirm the size designation and interface together before choosing an option.
Build the Operating Requirement
Name the process medium and describe its service temperatures and pressure conditions. Request the pressure-temperature envelope and seat or seal compatibility for the same assembly shown on the drawing. Include the intended manual operation and any installation access constraints. A complete enquiry links the model identifier, top-entry construction, body grade, dimensional drawing and operating evidence. That allows the proposed valve to be assessed against a single set of project requirements before the final configuration is selected.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
