3PC Flanged Ball Valve & Pneumatic Actuator Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
applicationGeneralConnection Typeflange
-
mediaBASEPort Size1/4in - 4in
-
structureControlmodel numberball valve
-
Connection Size1/4in - 4incustomized supportOEM, odm
-
Flow Rate0-100L/minFor Maximum Pipe Size4in
-
Operating PressureLow PressureOperating Temp. Range0~150 Celsius(0~270℉)
-
powermanualSealing MaterialPTFE
-
temperature of mediaMedium Temperaturewarranty1 year
A three-piece flanged ball-valve and pneumatic-actuator enquiry should identify the valve assembly and the operating package separately. The selected valve needs a defined mechanism, internal support arrangement and connection drawing. The actuator scope also needs to be clear before the assembly can be compared with the intended control duty. Use those requirements to organize the technical information for one model.
Identify the Valve Body and Ball Support
Obtain a section drawing that establishes the valve mechanism and identifies the selected internal arrangement. If the project requires a floating or trunnion-supported ball, state that requirement explicitly and have the proposed model matched to it. Request the body assembly drawing when three-piece construction is required. Define the body, ball and seat materials independently, with an exact grade or specification for each component.
Separate Pneumatic Equipment from Valve Scope
Specify whether the enquiry covers a valve alone or a complete pneumatic package. For pneumatic operation, describe the control-air conditions, operating sequence and required operating behavior. Obtain the actuator selection and sizing evidence for the proposed valve and duty. Confirm what operating equipment belongs to the assembly and how it connects to the valve. An image of a valve body does not define the contents of an actuator package.
Match the Package to Pipeline Conditions
Compare the flange facing, drilling, port and face-to-face dimensions with the mating pipeline. Name the medium and record the service temperatures in a consistent unit system. Request a qualified pressure-temperature envelope and sealing specification for that same valve configuration. Complete the enquiry with the assembly drawing, support arrangement, component grades, actuator scope and interface dimensions. Reviewing those records together helps establish whether the proposed package matches the installation and operating requirements.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
