Forged Carbon Steel SCH60 45-Degree Elbow
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty3 Yearscustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeBendhead codeHexagon
-
Overall Length1/2" - 12"Height1/2" - 12"
-
Surface TreatmentsmoothPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter1/2" - 12"
-
Pipe Featurescorrosion resistantPipe ClassNot Rated
-
ApplicationConstruction EngineeringThread TypesNPT
This forged carbon steel 45-degree elbow is listed with A105 and SCH60 references for construction enquiries. Its only size option is a half-inch to 12-inch range. Define an individual nominal size and verify the selected wall dimensions before requesting approval or supply.
Specify the 45-degree bend and actual SCH60 dimensions
Provide the sizing convention, required radius, wall thickness and tolerances on a dimensioned drawing. Confirm how SCH60 applies to the chosen nominal size rather than treating the schedule as a pressure rating. Long-radius, seamless and butt-weld details are not established by this product record.
The length, height and hole fields repeat the broad range. Obtain finished measurements for the ordered elbow, together with matching pipe dimensions. Clarify the Hexagon head code independently; it does not replace the stated 45-degree bend geometry or its drawing requirements.
Verify A105 supply and allocate the connection details
Request the complete material designation and condition, material certificates and traceability. Define the governing A105 document and edition with the actual component conformity scope. Confirm the forged manufacturing route and selected inspection requirements instead of treating title wording as completed certification.
Resolve Welding and NPT through a schedule identifying each end. Include preparation, full thread specification where applicable, mating parts, sealing and examination. Agree measurable criteria for the smooth surface and its inspection, handling and protection through delivery.
Qualify the construction operating envelope
Specify the medium composition, operating pressure and temperature, cycles, corrosion exposure and external loads. The Low Pressure and Not Rated fields provide no numerical acceptance limit for this selected elbow. Assess the corrosion claim against actual conditions and obtain the material, joint and rating evidence. Confirm the drawing, supply records and required tests before project approval.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
