Carbon Steel Butt Welding Pipe Fitting Cap
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
model number1/2''-108''typeCap
-
materialCarbon SteelTechnicForged
-
ConnectivityWeldingshapeEqual
-
head codeROUNDCOLORBLACK
-
THICKNESSSCH10-XXSMATERIALCARBON STEEL , STAINLESS
A welding pipe fitting cap is specified around the pipe end that needs to be closed. For a carbon steel butt-welding cap request, define the material grade and the opening dimensions together, then check the cap geometry against the intended closure arrangement.
Match the cap opening and welding edge
The cap opening, wall thickness and welding preparation need to be considered with the adjoining pipe. Provide the nominal size and its dimensional designation, as well as the required end dimensions and units, so the closure can be reviewed against the actual pipe. Confirm the cap depth and profile on a drawing; a broad size range cannot establish the geometry of one supplied cap.
State any low-temperature requirement explicitly
If the project calls for a particular carbon steel specification or grade, include it in the enquiry rather than relying on a general material label. A low-temperature requirement also needs the intended design conditions and the applicable qualification criteria. Request confirmation for the exact cap and grade before judging whether it can serve that duty; a grade keyword alone does not establish the required material or inspection record.
Describe the complete pipe-end closure
Send a pipe-end drawing identifying the opening, wall thickness, cap depth and welding preparation, with the required material specification alongside it. Include the applicable dimensional standard, medium and design pressure and temperature, and identify any documentation needed for project review. That package connects the cap selection to one closure requirement instead of treating every material or thickness label as a confirmed configuration. Final suitability should be assessed for the selected welding cap and the pipe end it will close.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
