A234 WPB Carbon Steel 45°/90° Reducing Elbow
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty3 Yearscustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeBendhead codeHexagon
-
Overall Length1/2" - 12"Height1/2" - 12"
-
Surface TreatmentsmoothPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter1/2" - 12"
-
Pipe Featurescorrosion resistantPipe ClassNot Rated
-
ApplicationConstruction EngineeringThread TypesNPT
This A234 WPB carbon steel reducing elbow listing describes45-degree and90-degree alternatives for construction piping. The sole catalogue choice is a Carbon Steel/Elbow range from half-inch to12-inch. Specify the required angle and reducing-end pair; neither is separately selected by the current variant.
Define both ends of the reducing elbow
Request a drawing identifying the larger and smaller nominal sizes, outside diameters, bores and wall transitions. Confirm actual radius, center-to-end dimensions and tolerances for the chosen angle. The title supplies no long-radius designation or numerical wall schedule, so those requirements need explicit agreement.
Check end preparation and mating pipe compatibility on both sides. Welding connectivity and an NPT thread entry coexist in the table without establishing the supplied arrangement. Resolve the actual ends rather than assuming a hybrid fitting. Clarify the Hexagon entry against the component drawing.
Confirm WPB material and manufacturing records
Obtain the full ASTM A234 WPB designation, condition, traceability and accepted material certificates. Request evidence supporting forged construction. No dimensional standard or seamless process is explicitly recorded here. Define smooth-surface inspection without treating corrosion-resistant wording as approval for a particular fluid.
The range repeated under Overall Length, Height and Mounting hole diameter does not identify actual reducing geometry or prove a hole feature. Allocate dimensions through the approved drawing and confirm availability of the individual angle, end-size pair and wall combination.
Agree conditions for the assembled piping
Low Pressure and Not Rated leave numerical service limits unspecified. State medium, pressure, temperature, cycling, loads and corrosion compatibility. Obtain approval for the unequal pipe interfaces and completed system. Agree joining, alignment, inspection, marking, certificates and quotation scope before procurement.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
