WPB Carbon Steel Long-Radius Butt-Weld Elbow
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty3 Yearscustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeBendhead codeHexagon
-
Overall Length1/2" - 12"Height1/2" - 12"
-
Surface TreatmentsmoothPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter1/2" - 12"
-
Pipe Featurescorrosion resistantPipe Class150
-
ApplicationConstruction EngineeringThread TypesNPT
This WPB carbon steel long-radius butt-weld elbow is listed for construction with A234 and B16.9 references. The title includes forged and seamless wording, and the table records Class 150. Select an individual size from the half-inch to 12-inch option and confirm the supply scope.
Complete the long-radius elbow drawing and size selection
Specify the actual bend angle, radius, wall thickness or schedule and tolerances. Long-radius wording does not select the angle or wall. Confirm the nominal size convention and mating pipe dimensions for the ordered size instead of treating the broad range as finished geometry.
Request actual length, height and hole measurements because these fields repeat the range. Clarify how the Hexagon head code applies to the component. The approved drawing should distinguish flow geometry from any code or feature reference that remains unexplained.
Verify WPB supply, standard scope and end preparation
Obtain the full selected material designation and condition, certificates and traceability. Identify the governing A234 and B16.9 documents, editions and conformity scope. Request records supporting forged and seamless supply descriptions rather than treating title references as completed manufacturing or compliance evidence.
Allocate the butt-weld title and NPT table reference through an end schedule. Agree preparation, applicable full thread details, mating interfaces, sealing and examination. Define measurable smooth-surface acceptance and delivery protection alongside the dimensional and material inspection requirements.
Confirm the Class 150 basis for construction conditions
Request the governing rating basis for Class 150 at the selected material and temperature; the class number is not an operating pressure. State the actual medium, pressure and temperature limits, cycles, exposure and loads. Low Pressure alone leaves these conditions undefined. Substantiate corrosion suitability for the intended environment and agree the joint, inspection and testing acceptance package.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
