2" RF B16.5 Class 150 A105 Socket-Weld Carbon Steel Flange, Forged CNC Machined
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
Surface TreatmentCNC MachinedApplicationConstruction
-
Bolt Hole Diameter1/2"~24"Bolt Hole Quantity6
A 2-inch RF B16.5 Class 150 A105 socket-weld carbon steel flange is the requested configuration for this construction enquiry. Confirm those particulars on the accepted delivery drawing before treating the forged, CNC-machined naming as an approved component specification.
Confirm the requested size and raised face
The actual size selection is a 1/2"~24" range rather than a discrete 2-inch choice. RF and Class 150 are title references, so obtain the selected facing and class explicitly. Agree the applicable B16.5 edition and type/size/class scope alongside the exact nominal size.
Carbon Steel and Stainless Steel each have Blind, Weld Neck, Slip On, Socket Weld, Lap Joint and Threaded Flange choices. Select one supplied type/material combination. For socket weld, require the accepted socket and bore dimensions with mating-pipe and installation requirements; another listed type cannot establish the same end arrangement.
Accept material and drilling evidence
A105 identifies the named carbon-material basis without certifying the stainless alternative. Obtain the accepted specification, grade, product form, condition and traceable inspection records, with evidence supporting the actual forging and machining route.
Verify outside diameter, thickness, raised-face dimensions/finish, bolt circle, hole count, hole diameters and tolerances. The six-hole table entry and broad bolt-hole diameter range cannot certify this requested drawing. The viewed open-bore flanges and dark-finished pair cannot establish delivered size, socket detail, A105 material, coating or drilling.
Evaluate the complete Class 150 joint
Construction wording does not supply an operating envelope. Class 150 requires the applicable material-temperature basis rather than one fixed pressure, and surface appearance does not prove finish compliance.
Submit actual medium, pressure, temperature, cycling and mechanical loads. Review compatible gasket, fasteners, mating flange and assembly requirements together with the selected end/drilling drawing and material package before accepting the complete joint.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
