WPB Carbon Steel SCH80 90-Degree Long-Radius Elbow
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty3 Yearscustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeBendhead codeHexagon
-
Overall Length1/2" - 12"Height1/2" - 12"
-
Surface TreatmentsmoothPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter1/2" - 12"
-
Pipe Featurescorrosion resistantPipe ClassNot Rated
-
ApplicationConstruction EngineeringThread TypesNPT
This WPB carbon steel 90-degree long-radius elbow is listed with SCH80, butt-weld and B16.9 references for construction use. Its size option spans a half-inch to 12 inches. Select the actual nominal size and confirm the complete material and dimensional specification before ordering.
Define the SCH80 wall and long-radius bend drawing
Specify the sizing convention, actual radius, wall thickness and tolerances for the chosen 90-degree elbow. Verify the SCH80 dimensions against the selected size and matching pipe. Schedule wording does not supply a pressure limit or a finished inspection record.
The table repeats the size range for length, height and hole diameter. Obtain the corresponding individual measurements on an approved drawing. Clarify what the Hexagon head code refers to without substituting it for the bend geometry or assuming an additional connection.
Confirm WPB, forged manufacture and butt-weld ends
Request the full material designation and condition, governing material document and edition, certificates and traceability. WPB alone does not define the complete procurement package. Identify the B16.9 document and conformity scope applying to the component, and obtain evidence of the forged route; seamless construction is not stated.
Resolve the butt-weld title against the NPT table entry using an end-by-end schedule. Agree preparation, any applicable full thread designation, mating interfaces, sealing and examination. Define measurable smooth-surface acceptance and suitable delivery protection.
Relate construction conditions to selected acceptance
Record the intended medium and composition, operating pressure and temperature, cycles, external exposure and mechanical loads. Low Pressure and Not Rated leave the selected elbow without numerical duty confirmation. Evaluate corrosion resistance for that environment and obtain the material, joint and rating evidence. Include dimensional examination and testing requirements in the final approved supply documents.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
