ANSI Class 1500 Flange | Material and Connection Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
Surface TreatmentFFmodel number1/2''-108''
-
ApplicationConstruction, Chemical Industry, Air Conditioning, Agricultural Irrigation, Environmental Engineering, Fiber Optic Co MMunication, Food And BeverageBolt Hole Diameter11 mm(0.43in)
-
Bolt Hole Quantity4, 6Materialstainless steel
A flange enquiry for this listing should start by identifying the actual component and its intended connection function. Resolve the selected construction and material before comparing class or application references. A model-linked drawing and material record provide the basis for checking the flange against the proposed mating joint and operating requirements.
Resolve the Flange Construction and Exact Material
State whether the project requires a threaded connection, a blind closure or another flange form, and obtain a drawing of that selected model. Identify the exact material designation and supporting record; general stainless-steel and carbon-steel labels do not describe the same material requirement. Verify that the quotation, drawing and material documentation refer to one construction. Product appearance alone cannot establish the connection type, grade or qualified application scope.
Specify One Size and the Complete Mating Interface
Give the individual nominal size and the dimensions of the mating pipe or flange. Broad size ranges do not establish the dimensions or availability of every item within them. Request flange diameter, thickness, facing, bolt circle, hole quantity and hole diameter, together with the bore or closure detail appropriate to the selected form. Compare the sealing and connection interfaces as a complete joint rather than accepting isolated hole or facing labels.
Define the Standard, Class and Application Evidence
Identify the exact ANSI-referenced standard and edition, then state the required class and request its material-dependent pressure-temperature basis. Provide the actual fluid, operating pressure and temperature and any installation requirements. For a sector with specific material, cleanliness or acceptance criteria, include those criteria explicitly and obtain supporting evidence. An application list or Class 1500 reference alone does not qualify the proposed assembly. Complete the enquiry with the resolved model, grade, interface drawing and documented joint/service scope.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
