90° Stainless Steel Pipe Fitting Elbow Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class125SizeCustomized Size
-
Product nameElbow
This stainless elbow enquiry requests a ninety-degree change of pipe direction. The actual variants identify Elbow with broad material and millimetre size choices, but do not assign a bend radius, exact grade or wall. Use a selected drawing to define how the bend will fit your two adjoining pipes.
Check radius and clearance around the direction change
Confirm the requested angle with its tolerance, centreline radius and centre-to-end dimensions. Record the orientation and available installation space before selecting the bend. The photographs show several silver curved examples without establishing actual dimensions or material. Do not classify the selected elbow as short-radius or long-radius from those images; that choice needs the documented geometry.
Translate the size choice into both end measurements
Explain the nominal-size convention behind the millimetre menu labels, then verify each outside diameter and wall with the mating pipe data. Confirm what Equal means for the selected drawing. Hexagon, the mounting-hole value and Customized Size do not provide complete bend dimensions or a supplied capacity range. Establish the applicable dimensional requirement and wall designation; no schedule is stated here.
Define the stainless material and actual welded joint
Choose one exact stainless grade with complete specifications and traceability; the page does not identify 304 or 316. Alloy and Carbon Steel alternatives need their own material and joining assessment. Define Welding through the actual end detail, preparation, alignment and inspection requirements, without assuming a particular weld-end design. Verify Forged through production records and clarify Painting and joint-zone condition. Establish Pipe Class 125's standard, unit and material/temperature basis, then evaluate fluid, pressure, temperature, corrosion and mechanical loads across the bend and both completed joints.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
