Carbon Steel Pipe Elbow | 45, 90 and 180 Degree Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.2 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
A steel pipe elbow enquiry begins with the required direction change and the route available for the pipeline. Select the angle and bend geometry before comparing material or manufacturing requirements. If the project needs a return arrangement, identify exactly how the proposed components form that arrangement so the complete assembly can be reviewed.
Choose the Angle and Identify Every Component
State whether the design requires a 45-, 90- or 180-degree direction change, then request a drawing of the selected proposal. Specify the bend radius and relevant end-to-centre dimensions. For a return requirement, establish whether the proposal consists of one component or joined components; identify every joint and include it in the fabrication review. The presence of several angle terms in an enquiry does not define a model for each angle.
Fit the End Geometry to the Planned Pipe Route
Provide the nominal size, mating outside diameter and wall thickness at both ends. Define weld preparation and compare the proposed geometry with available clearance, pipe alignment and support requirements. Name the exact steel grade and requested manufacturing route. Where seamless construction is required, obtain production documentation for the selected component rather than relying on surface appearance. Any coating or special mounting requirement should also be identified on the drawing and specification.
Review the Duty of the Complete Bend Arrangement
Identify the governing dimensional and pressure-design standards and state the fluid, operating pressure and temperature. Include relevant operating changes and the joint requirements that apply to the assembly. Request material, manufacturing and design records covering the proposed configuration. An isolated class number cannot establish the pressure capability of the fitting or its joints. Complete the enquiry with the angle, radius, component arrangement, end dimensions and qualified service scope so the intended direction change can be assessed as a complete pipeline detail.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
