API 6D Trunnion Mounted Ball Valve Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
applicationGeneralBall MaterialSTAINLESS STEEL
-
Connection TypeflangemediaBASE
-
Port Size1/4in - 4instructureBall
-
model numberball valveConnection Size1/4in - 4in
-
customized supportOEM, odmFlow Rate0-100L/min
-
For Maximum Pipe Size4in(10.16cm)Operating PressureLow Pressure
-
Operating Temp. Range0~150 Celsiuspowermanual
-
Sealing MaterialPTFEtemperature of mediaMedium Temperature
-
warranty1 year
A ball valve enquiry for this listing should connect the required trunnion-mounted design with an identifiable assembly. Establish the exact model before comparing seat construction, body materials or operating limits. A section drawing and model-linked records provide the basis for evaluating the proposed valve against the pipeline specification.
Resolve Seat Construction and Body Process
State whether the application requires a metal seat or a PTFE seat, and request the corresponding seal arrangement. Ask for a section drawing identifying ball support, stem, seats and body joints. Specify body, ball and sealing materials separately; a stainless-steel component label does not identify every wetted part. Obtain material records and manufacturing documentation that establish whether the selected body is forged or cast. Keep these construction decisions tied to the quoted configuration.
Match the Bore, Flanges and Manual Operator
Give the exact nominal connection size and required flow bore independently. Request flange standard, drilling, facing and face-to-face dimensions, then compare them with the mating pipeline. Include installation orientation, surrounding clearance and access for the manual operator. Confirm whether the proposed operator meets the required operating arrangement and whether the drawings show the same assembly as the quotation.
Qualify API 6D Scope and Service Conditions
Identify the required API 6D edition and conformity scope, and obtain the selected model's supporting test records. Describe the fluid composition, operating pressure and temperature together, including relevant operating changes. Ask for a qualified pressure-temperature envelope and assess flow requirements at the intended differential pressure. A broad temperature range, flow figure or qualitative pressure label does not establish this operating envelope. Complete the enquiry with the approved section drawing, interface dimensions, material requirements and documented duty limits.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
