UNS N06625 ASME B16.5 Flange | Class 600 Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.25 in
-
Pipe Class1000SizeCustomized Size
-
Product nameElbow
A flange enquiry with a UNS N06625 requirement should begin with an exact material specification and a drawing of the selected flange. Identify the required ASME B16.5 scope, flange type and class before comparing interfaces. The material, dimensions and documented rating basis need to describe the same proposed component and mating joint.
Confirm the Material and Standard-Defined Class
State the UNS designation and applicable material requirements, then obtain traceable material and manufacturing records for the quoted item. Generic stainless-steel, alloy or carbon-steel labels do not replace an exact designation. Specify the ASME B16.5 edition and required class and request the supporting material-dependent pressure-temperature basis. Where Class 600 is required, have the selected-model documentation establish that designation and its scope before using it in the service review.
Map Nominal Size, Bore, Facing and Drilling
Request the flange type, nominal size, outside diameter, thickness, facing and complete bolt pattern on one drawing. For a twelve-inch requirement, confirm the nominal-size mapping instead of assuming that a millimetre option represents the same interface. If the mating pipe requires SCH80S, identify its actual dimensions and confirm the corresponding flange bore and connection detail. Compare the complete mating flange and sealing interface; one hole-diameter label cannot define the drilling pattern.
Review the Complete Flanged Joint for Service
Provide fluid composition, operating pressure and temperature along with the joint and installation requirements. Obtain evidence supporting the selected flange, mating components and qualified design basis. Include manufacturing requirements explicitly and define any coating independently of material identity or rated service. Complete the enquiry with the exact material, approved dimensional drawing, standard-defined class, bore and mating-interface requirements and documented operating limits for the proposed assembly.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
