Stainless Steel Pipe Fittings: Socket Coupling, Exhaust Elbow & Reducer Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
TechnicForgedConnectivityWelding
-
shapeEqualhead codeHexagon
-
Surface TreatmentPaintingMounting hole diameter0.26 in
-
Pipe Class150SizeCustomized Size
-
Product nameElbow
This pipe fitting enquiry covers stainless steel, Alloy and carbon steel choices under reducer, elbow and socket-coupling naming. Confirm the actual component construction before selecting it for a pipe transition or exhaust connection.
Identify the delivered component before defining the transition
The fifteen selections combine reducer with 10 mm, 12 mm, 14 mm, 50 mm or 30 mm and one of three material labels. Each metric size is a single label; it does not specify both ends of a reducing fitting.
Request an accepted drawing identifying the component subtype and equal or reducing geometry. For a reducer, include large and small end diameters, diameter basis, wall thicknesses, length, concentricity or offset and tolerances. An elbow or coupling enquiry needs its corresponding geometry. Photographs assist shape comparison without certifying the supplied dimensions or subtype.
Agree welding ends and the exact selected material
Specify whether the required connection uses socket or butt-weld ends, then define mating dimensions, preparation, wall compatibility and inspection acceptance. Hexagon wording does not establish the complete fitting form. Confirm the manufacturing route against the Forged requirement.
Stainless Steel, Alloy and Carbon Steel are material alternatives. Obtain the selected product specification, exact grade and traceable certificate; Alloy alone does not identify its composition. For painting, agree preparation, coating chemistry, thickness and service compatibility where needed.
Assess exhaust conditions and complete-joint acceptance
Exhaust wording does not establish thermal, corrosion or emissions qualification. Provide medium composition, operating temperature, pressure and cycling. Class 150 requires a governing rating basis and material assessment; it is not an independent 150 psi operating limit.
Customized Size and the 0.26 in mounting-hole entry do not complete the pipe ends. Send the accepted subtype drawing, both end dimensions, selected material evidence, welding and coating requirements, actual duty and inspection criteria for a specific fitting enquiry.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
