Welded Elbow for Building Water Supply
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty3 Yearscustomized supportOEM, ODM, obm, odm
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall Length4 inHeight10cm
-
Surface TreatmentPolishingPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter0.2 in
-
Pipe FeaturesNo additional FeaturesPipe Class1000
-
ApplicationBuilding Water Supply And DrainageThread TypesNPT OR BSPT
This ST HDPE large-diameter welded elbow enquiry concerns building-water supply and drainage connections. Agree the actual supplied material and fitting configuration before ordering against the product name. The purchase specification should identify each component, both pipe ends and the operating conditions.
Define the water-supply connection
The actual size label is 10 mm, so state whether it represents a nominal size, outside diameter, bore or another measurement. Large-diameter wording does not select a dimension. The 4 in overall length, 10cm height and 0.2-inch mounting-hole entries describe other dimensions rather than replacement pipe-end sizes.
Provide a drawing with the required angle, centerline radius, center-to-end dimensions, inlet and outlet geometry, bore, wall and tolerances. Specify the joining arrangement and any welding preparation or NPT/BSPT feature by the relevant component and end. Do not infer the delivered size or angle from a reference photograph.
Document material and production requirements
Stainless Steel and Carbon Steel choices are alternatives and need the selected specification, grade, product condition and inspection traceability. Where an HDPE component is requested, identify its accepted material designation and any separate connecting parts. Title naming alone cannot certify the assembly's composition.
Match forged and welded wording to the accepted material and applicable production or attachment step. Request the relevant manufacturing and inspection evidence. Agree the polished finish without treating appearance as proof of corrosion resistance or water-service approval. Use ST as an enquiry reference and confirm provenance when manufacturer identity matters.
Set numerical acceptance for the project
Provide the actual medium, pressure, temperature, cycling and imposed loads. Class 1000 naming requires its governing standard and material-temperature basis; low-pressure wording gives no numerical limit. Agree installation and inspection requirements, requested OEM, ODM or OBM scope, and the stated three-year warranty terms with the quotation.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
