3-Inch 90 Degree Forged Welding Elbow Pipe Fitting

• warranty

  3 Years
  customized support

  OEM
• Technic

  FORGED
  Connectivity

  Welding
• shape

  Bend
  head code

  Hexagon
• Overall Length

  1/2" - 12"
  Height

  1/2" - 12"
• Surface Treatment

  smooth
  Pressure

  Low Pressure
• System of Measurement

  INCH
  Mounting hole diameter

  1/2" - 12"
• Pipe Features

  corrosion resistant
  Pipe Class

  Not Rated
• Application

  Construction Engineering
  Thread Types

  NPT

This 3-inch 90-degree forged welding elbow enquiry carries seamless 316/316L stainless steel title references. Its actual option specifies Carbon Steel within a half-inch-to-12-inch range. Confirm both the supplied material and selected three-inch requirement before procurement; the catalogue records do not establish a certified stainless configuration.

Resolve the 316/316L and carbon-steel selection

Ask the supplier for the actual material designation, governing specification, condition, heat traceability and certificates. The stainless title and carbon-steel option are not interchangeable. Surface appearance cannot certify either grade, so use accepted material records rather than photographs to reconcile the discrepancy.

Request evidence supporting seamless and forged manufacture. These title references do not replace process documentation for the selected item. Agree the applicable dimensional standard explicitly: no exact standard number, wall schedule or long/short radius is recorded in the source specification.

Specify the three-inch geometry and connection

Obtain nominal size, outside diameters, bores, actual wall, measured radius, 90-degree angle and center-to-end dimensions. The shared range does not separately select three inches or supply those measurements. Length, height and mounting-hole fields repeat that range; clarify each value and whether a hole feature exists.

Welding and NPT entries need an accepted end-detail drawing, matching pipe and joining requirements. Welding alone does not establish butt-weld preparation. Resolve Hexagon against the actual elbow geometry, and define smooth-surface inspection without treating corrosion-resistant wording as proof of coating or medium compatibility.

Agree operating limits after the identity is confirmed

The Low Pressure and Not Rated labels leave the service envelope unspecified. Provide medium, pressure, temperature, exposure, cycling and loads for construction acceptance. Agree joining, alignment, support, inspection, marking, material/process/dimensional records, warranty terms and quotation scope for the confirmed component.