Galvanized SCH40 Steel 45-Degree Elbow
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty3 Yearscustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeBendhead codeHexagon
-
Overall Length1/2" - 12"Height1/2" - 12"
-
Surface TreatmentsmoothPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter1/2" - 12"
-
Pipe Featurescorrosion resistantPipe ClassNot Rated
-
ApplicationConstruction EngineeringThread TypesNPT
This construction listing describes a galvanized steel 45-degree elbow with an SCH40 reference. Carbon Steel is the actual selectable material, while welded and NPT end descriptions also appear. Confirm the supplied dimensions, surface treatment and connection before agreeing the component specification.
Set the 45-degree geometry and wall requirements
Provide nominal size, outside diameter and the actual wall dimensions required for the selected schedule. SCH40 does not supply one universal wall thickness across the size range. Define bend radius, angle and center-to-end dimensions on the approved drawing for the proposed pipe connection.
The 1/2–12 inch option and its repetition under length, height and mounting-hole diameter are not actual measurements. Clarify Hexagon wording against the elbow geometry. Confirm the selected size and configuration are available before using the broad range to prepare the purchase order.
Agree galvanizing and end acceptance
Request the galvanizing process, covered surfaces, relevant thickness and inspection criteria. The title does not supply treatment records, and smooth or corrosion resistant wording does not establish performance. Agree measurable surface acceptance and preservation requirements for the actual supplied component.
Resolve the welded reference and NPT table entry with an end drawing and mating-pipe requirements. Specify the applicable preparation or thread inspections rather than assuming one installation arrangement. Obtain the carbon steel grade, condition and traceability, with manufacturing evidence supporting the recorded FORGED description.
Review construction duty and inspection records
Describe the medium, contaminants, external exposure, pressure, temperature, transients, cycles and loads. Low Pressure and Not Rated leave allowable numerical limits unspecified. Assess the selected elbow and joint under the project requirements, then confirm material, galvanizing, dimensional and end records, marking, preservation, quantity and delivery. Agree OEM requests and warranty terms separately from technical acceptance.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
