Forged Steel Elbow for Oil, Water and Gas
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty3 Yearscustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeBendhead codeHexagon
-
Overall Length1/2" - 12"Height1/2" - 12"
-
Surface TreatmentsmoothPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter1/2" - 12"
-
Pipe Featurescorrosion resistantPipe ClassNot Rated
-
ApplicationConstruction EngineeringThread TypesNPT
This forged steel elbow listing names oil, water and gas applications and uses a grade 316 stainless socket weld description. The selectable material is Carbon Steel, and NPT also appears in the table. Resolve the actual supplied configuration before matching the elbow to a particular fluid system.
Identify the supplied material and ends
Request grade, condition and traceability records to clarify the stainless title against the carbon steel option. Generic descriptions do not settle the actual material. Define the numbered material specification and edition, since ASTM wording alone does not identify a complete acceptance standard or supplied certificate.
Obtain the end drawing to resolve the socket weld reference and NPT entry. Specify the actual socket and pipe-fit requirements or thread geometry, as applicable, with the inspections needed for the selected connection. Do not treat both descriptions as one verified installation arrangement.
Provide the actual bend dimensions
No angle or radius is specified here. Define them with nominal size, outside diameter, wall thickness and center-to-end dimensions on the selected drawing. The 1/2–12 inch option and its repetition under length, height and mounting-hole diameter do not establish those measurements.
Clarify Hexagon wording against the component geometry. Agree manufacturing records supporting FORGED and measurable surface requirements beyond smooth and corrosion resistant descriptions. Those entries do not demonstrate treatment chemistry, finish values or corrosion performance for the actual supplied elbow.
Choose the intended fluid service
State whether the order serves oil, water or gas, then provide composition, contaminants, pressure, temperature, cycles, transients and relevant loads. Broad application wording does not approve every medium. Low Pressure and Not Rated leave numerical limits unspecified. Confirm material, dimensional, end and surface documentation, marking, preservation and delivery, with OEM and warranty terms agreed separately.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
