Steel Tee for Pharmaceutical Equipment
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPaintingPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This tee listing is intended for pharmaceutical equipment and includes JIS B2311, SUS304 and sanitary-clamp references. The original image supports a tee form, while the selectable type says Reducer. Confirm the supplied component and its approved drawing before treating a title reference as an accepted configuration.
Confirm alloy and mating connection details
The stainless steel title differs from the Carbon Steel and a234wpb material options. Obtain the actual grade, condition, traceability and material inspection records for the selected item. The image cannot identify SUS304, and the option labels do not establish an accepted material for process-contact service.
The title describes Clamp, but the table records Welding. Request the actual end and mating-component drawings, dimensions, tolerances and joint requirements. Do not assume a sanitary clamp interface from the wording alone. Confirm run and branch geometry, wall requirements and center-to-end dimensions for the ordered fitting.
Define process-contact surface acceptance
Clarify which surfaces the Painting entry covers and how they relate to the intended process. Specify the required finish, surface inspection and cleaning acceptance for the actual component. Visible appearance does not establish surface roughness, cleanability, corrosion performance or approval for pharmaceutical equipment.
Identify the applicable JIS B2311 edition and component scope, then request the corresponding conformity and production documentation. Equal, Hexagon, Metric and Customized Size entries do not provide numerical geometry. Agree actual dimensions and units together with any project-specific hygienic documentation needed for the supplied assembly.
Review equipment and cleaning conditions
Describe the process fluid, concentration, contaminants, pressure, temperature, cycles, cleaning and sterilization conditions, plus external loads. High Pressure and Other class do not state numerical allowable limits. Evaluate the confirmed material, joint and surface package against these requirements, then agree inspections, records, marking, protection and delivery before release.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
