Carbon Steel Flange for Low-Pressure Water Supply
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This carbon steel flange listing is intended for low-pressure water supply enquiries. Its title references JIS B2220, S10C, ASME and ISO, and describes a Polished plate flange. Confirm the actual construction and material documentation before matching these references to a specific water-system connection.
Identify the intended plate construction
The selectable types cover several flange designs, but do not include a separate Plate Flange choice. Ask for the drawing of the proposed component rather than treating the plate wording as another name for an existing option. Select the actual type and connection details required by the project.
Specify nominal size, facing, thickness, bore and the full drilling pattern. The table states four half-inch bolt holes; verify their applicability against the mating flange. The shared 1/2–120 inch range does not demonstrate a common drilling layout or confirm every material and construction combination as available.
Confirm S10C and the applicable specification
Request actual grade, condition and traceability records supporting the S10C designation. Carbon Steel is the generic selectable material and does not independently verify that more specific reference. Define the intended finish beyond Polished and agree how the relevant surfaces will be inspected.
Confirm the applicable edition and selected requirements of JIS B2220 for the actual component. ASME and ISO wording does not supply additional numbered specifications or establish certification. Agree the required dimensional and connection basis without assuming interchangeability between different standard systems.
Quantify the water supply duty
Low Pressure is a general description rather than a numerical operating limit. Provide water composition, temperature, normal and transient pressure, cycles and joint requirements for review. No potable-water approval is established here. Confirm the material and dimensional inspections, finish acceptance, marking, preservation, quantity and delivery against the actual water-system specification.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
