ASTM A234 WPB Carbon Steel 90° LR Elbow
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty3 Yearscustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeBendhead codeHexagon
-
Overall Length1/2" - 12"Height1/2" - 12"
-
Surface TreatmentsmoothPressureLow Pressure
-
System of MeasurementINCHMounting hole diameter1/2" - 12"
-
Pipe Featurescorrosion resistantPipe ClassNot Rated
-
ApplicationConstruction EngineeringThread TypesNPT
This ASTM A234 WPB carbon steel elbow listing describes a90-degree long-radius component for construction piping. The actual catalogue choice is Carbon Steel/Elbow with a half-inch-to12-inch range. Establish the individual size and approved drawing before specifying the component for a project.
Resolve the end connection before installation
The table records Welding connectivity and an NPT thread entry. Those fields do not establish one accepted end design. Request a drawing identifying the actual connection, end preparation and mating pipe interface; do not assume both arrangements are supplied on the same elbow.
Likewise, the Hexagon head code needs clarification against the selected component. Confirm90-degree angle, long-radius geometry, center-to-end dimensions, bore, outside diameter, wall thickness/schedule and tolerances. No dimensional standard or numerical schedule is established here, so agree the actual governing specification.
Verify material, manufacture and individual dimensions
Obtain the full ASTM A234 WPB designation, condition, traceability and material certificates. Request manufacturing evidence for seamless and forged wording. Define the smooth finish and inspection criteria without treating appearance or a generic corrosion-resistant entry as fluid-specific performance approval.
The size option is a range rather than an individual selection. Overall Length, Height and Mounting hole diameter repeat that range; they cannot determine actual elbow dimensions or prove a hole feature. Use the accepted drawing to allocate dimensions and confirm individual supply.
Approve service conditions for the piping system
Low Pressure and Not Rated provide no accepted numerical duty. Specify fluid, pressure, temperature, cycling, loads and corrosion allowance. Confirm pipe/wall compatibility, installation and attachment procedure, alignment and inspection. Agree certificates, marking and quotation scope before procurement for the actual construction project.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
