A105 Class 2500 Socket Weld Flange for Power Plants
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This power generation listing describes a steel socket weld flange with A105 and Class 2500 references. It also names ANSI, JIS and DIN and uses High Pressure wording. Confirm the actual material, selected specification and operating requirements before accepting the proposed size and class combination.
Check the socket and pipe requirements
The Carbon Steel socket weld option is selectable. Provide the pipe dimensions and required flange drawing, including socket bore, depth and fit, facing, thickness and complete drilling pattern. Agree welding and inspection requirements under the project specification rather than assuming a universal socket gap or installation procedure.
Verify the four half-inch bolt holes listed in the table against the mating component for the selected design. The shared 1/2–120 inch range does not confirm every socket weld size, material and class combination as available. Obtain written confirmation for the exact configuration being considered.
Establish Class 2500 and standard applicability
Class 2500 is a class designation, not one allowable pressure for all temperatures or materials. High Pressure wording does not supply the required operating envelope. Confirm the actual pressure-temperature and joint requirements for the selected material and the applicable component design.
Choose the numbered ANSI, JIS or DIN specification and its edition where applicable. The combined names do not establish interchangeable socket geometry, facing or drilling. Request material records supporting A105, with condition, traceability and the required production inspections; Forged wording alone is not a supplied inspection package.
Review the power-system duty
State the fluid, temperature, pressure, transients, cycles and loads affecting the connection. Assess the socket weld flange under the plant requirements and selected standard scope. Clarify the finish beyond Polished, then agree material, socket and dimensional inspection records, marking, preservation, quantity and delivery for the actual component.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
