Steel Pipe for High-Temperature Applications
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
InvoicingBy Actual WeightOiled or Non-oiledNon-oiled
-
Section ShapeRoundSurface TreatmentCold Rolled
-
Tolerance±1%Alloy Or NotNon-Alloy
-
ApplicationFluid Pipe, Drill Pipe, Hydraulic Pipe, Gas Pipe, Oil PipeCertificateAPI , ISO 9001
-
Delivery Time8 ~ 14 daysGradestainless steel
-
Outer Diameter219 - 1066 mmSpecial PipeAPI Pipe, Other, EMT Pipe, Thick Wall Pipe
-
StandardASTMTechniqueERW
This steel pipe listing references high-chromium stainless material, seamless construction and high-temperature oxidation resistance. The table includes Non-Alloy, generic stainless steel and ERW. Establish the actual supplied grade and condition before assigning oxidation or thermal performance to the pipe represented by these descriptions.
Verify chromium material and actual manufacturing route
Request the specification, grade, chemistry, condition and traceable material inspection records for the order. Generic stainless wording does not identify the high-chromium grade, and the Non-Alloy classification needs clarification. Confirm seamless or ERW construction with manufacturing documentation before assessing requirements that depend on the production route.
The original photograph shows bundled round pipes with red surfaces and protected ends. It cannot establish chromium content, surface treatment or oxidation behaviour. Confirm actual Cold Rolled finish, Non-oiled supply and any additional treatment through records; surface colour is not evidence of heat resistance or a defined coating system.
Specify geometry for the thermal installation
Choose an actual wall within the 6–20 mm range and identify the required 12 m or 6 m length selection. Define outside diameter, bore, length, straightness, roundness and end requirements on the installation drawing. The 219–1066 mm diameter entry must be matched to the selected component.
Agree the dimensional scope and measurement basis for ±1%. Define the end preparation and joint arrangement, including the required surface condition and preservation. Verify actual fit and material condition against the drawing rather than inferring thermal capability, wall thickness or end accuracy from the pipe photograph.
Set oxidation conditions and evidence for acceptance
Provide the actual atmosphere or medium, contaminants, pressure, temperature, exposure duration, thermal cycles, gradients and loads. Identify the governing specification and edition, and agree required material, dimensional, surface, end and thermal project tests. Use explicit criteria and traceable reports. Title wording and general API or ISO 9001 labels establish no numerical oxidation rate, allowable temperature or service-life guarantee.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
