SCH160 Carbon Steel Welded Tee for Steam and Oil
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPaintingPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This heavy-wall carbon steel welded tee listing targets steam and oil systems and includes an SCH160 reference. The original image supports a tee form, while the selectable type is labeled Reducer. Confirm the actual component, wall dimensions and supplied material package before accepting a configuration for thermal service.
Map SCH160 to actual wall requirements
Specify the nominal size and dimensional specification used to establish the required wall values and tolerances. SCH160 and Heavy Wall do not provide one fixed thickness across the size range. Obtain actual run and branch dimensions, bore, diameters and center-to-end measurements on the approved drawing.
Resolve how the tee maps to the selected option and confirm the Equal arrangement. Define welding end preparation, mating-pipe requirements and dimensional inspection criteria. Customized Size, Metric and Hexagon entries do not provide measured geometry, and the image cannot verify wall thickness or establish an allowable pressure rating.
Confirm material and thermal surface acceptance
Request the supplied grade, condition, traceability and material inspection records. Carbon Steel and a234wpb options are labels rather than certificates. Obtain actual production evidence supporting Forged and the required acceptance documentation for the selected fitting, including any material requirements linked to the intended thermal duty.
Define Painting coverage, surface acceptance and inspection criteria. Confirm the actual treatment against the requested temperature and exposure conditions rather than assuming thermal resistance from the title or dark appearance. Agree preservation and handling requirements separately from the operating suitability of the supplied surface package.
Define steam or oil operating conditions
State whether the component serves steam, oil or separate systems, with actual composition, pressure, temperature, thermal cycles, transients and loads. High Temperature, High Pressure and Other class leave numerical limits unspecified. Evaluate the confirmed material, wall and joints, then agree inspections, records, marking, protection and delivery against project acceptance.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
