Carbon Steel Equal Tee for Gas and Oil Piping
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPaintingPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesOtherPipe ClassOther
-
ApplicationOtherThread TypesCustomized Size
This gas and oil piping enquiry is listed as a forged carbon steel equal tee, with B16.9, A234 WPB and SCH10–SCH160 references. Its table records Equal and Welding, and the image shows tee-shaped branch fittings. The actual options nevertheless say Reducer, requiring confirmation of the item supplied.
Choose the actual tee size and wall schedule
Start with a supplier drawing that reconciles the order label and equal-tee description. Identify run and branch nominal sizes, bore dimensions, wall requirements and center-to-end geometry. Equal wording should be verified through the selected drawing, since the photograph does not measure the openings.
The broad half-inch to 110-inch option and SCH10–SCH160 title do not establish every available size and schedule combination. State the precise nominal size, schedule designation and required wall dimensions, with the applicable dimensional basis and tolerances. Agree end preparation and actual availability for that configuration.
Check gas and oil duty against the material offered
Describe the fluid composition, contaminants, pressure, temperature and operating cycles. Include mechanical loads and any project-specific exposure requirements so the selected steel and welded joint can be assessed. Gas/Oil wording alone does not establish suitability for sour fluids, hydrogen or a particular operating envelope.
The material choices are Carbon Steel and a234wpb. Confirm the actual grade and condition through traceable records, together with the claimed forging route and inspection results. Check the listed ANSI B16.9 reference and relevant edition for the offered dimensions; the generic material option is not automatically documented WPB.
Agree surface protection and acceptance checks
Painting requires a defined preparation, coating system and inspection specification where protection is needed. Dark appearance cannot identify the paint performance. High Pressure provides no numerical limit. Resolve the generic Hexagon and customized thread fields, then agree dimensional, welding, testing and project acceptance requirements for the confirmed tee.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
