PN16 Carbon Steel Weld Neck Flange for Oil and Gas
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This oil and gas piping listing describes a PN16 carbon steel weld neck flange with an EN 1092-1 reference. The actual catalog contains a Carbon Steel and Weld Neck Flange combination alongside other options. Confirm the selected standard, size and material before defining the mating joint.
Specify the EN flange and welding geometry
Identify the applicable EN 1092-1 edition, flange type, nominal size, facing and requirements for the chosen design. Match the neck, hub, bore, wall and bevel to the adjoining pipe and welding specification. The broad inch-size option does not establish a complete nominal-diameter mapping or measured end dimensions.
Confirm the exact combination within the shared 1/2–120 inch range and its availability. Check flange thickness, bolt circle, hole count and diameter on the approved drawing. Four half-inch holes appear in the table, but that pattern should not be extended to every size, material and type in the catalog.
Verify material and PN16 acceptance
Request the actual carbon steel grade, condition, chemistry and traceability, with production and inspection records required by the purchase specification. The generic material option does not establish a particular grade or certified EN conformity. Other selectable flange materials and types should not replace the selected weld neck configuration without review.
PN16 is a title designation rather than a universal allowable pressure at every temperature. Confirm the applicable pressure-temperature requirements for the actual material and design. State the oil or gas composition, water and contaminants, cycles and loads needed for the joint assessment.
Agree finish and pipeline supply requirements
Clarify the numerical finish or other surface requirements beyond Polished. The wording does not establish corrosion performance or sour-service or hydrogen qualification. Review the flange, weld, gasket and bolting requirements for the project, then confirm dimensional inspection, marking, preservation, quantity, material documents and delivery timing.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
