Precision Steel Pipe for Mechanical Parts and Oil Piping
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
InvoicingBy Actual WeightOiled or Non-oiledNon-oiled
-
Section ShapeRoundSurface TreatmentCold Rolled
-
Tolerance±1%Alloy Or NotNon-Alloy
-
ApplicationFluid Pipe, Drill Pipe, Hydraulic Pipe, Gas Pipe, Oil PipeCertificateAPI , ISO 9001
-
Delivery Time8 ~ 14 daysGradestainless steel
-
Outer Diameter219 - 1066 mmSpecial PipeAPI Pipe, Other, EMT Pipe, Thick Wall Pipe
-
StandardASTMTechniqueERW
This precision steel pipe listing targets mechanical parts and oil applications with EN 10305-1 and E355 carbon-steel references. The table instead gives stainless steel and ERW. Confirm actual supplied material, construction and dimensional acceptance before selecting stock for the intended component or piping project.
Resolve E355 supply and the applicable standard scope
Request grade, condition, traceability and material inspection records to resolve the carbon-steel and stainless wording. Establish seamless or ERW construction from the actual manufacturing package rather than the title. Cold Rolled does not determine the initial route or certify a supplied precision level.
Clarify the EN 10305-1 edition and product scope against the generic ASTM table entry. Agree the standard required by the selected project and obtain conformity documents for the actual supply. API and ISO 9001 labels do not demonstrate component, oil-service or EMT approval without relevant scope and records.
Specify precision through actual dimensional criteria
The options list a 6–20 mm thickness range with 6 m or 12 m lengths. Define selected wall, length, outside diameter and bore, together with straightness, roundness and surface requirements. The 219–1066 mm diameter range and ±1% entry do not establish one dimensional package or measurement basis.
Use an approved drawing or order specification to set accepted tolerances and inspection methods. Confirm actual Non-oiled finish, surface condition and preservation. The image shows round pipe forms with end covers but cannot verify grade, route, dimensional accuracy, cleanliness or a corrosion-performance level for the supplied stock.
Identify the selected mechanical or oil-line duty
For mechanical parts, define mating geometry, loads, cycles and processing requirements. For the intended oil line, state actual fluid, contaminants, pressure, temperature and joint acceptance. Clarify any EMT-related requirement separately. Assess the confirmed package, then agree material, dimensional and surface inspections, project tests, documentation, marking, protection and delivery before approval.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
