321 PN40 Raised Face Flange for Pharmaceutical Equipment
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This flange listing addresses pharmaceutical equipment enquiries with grade 321 stainless steel, PN40 and EN 1092-1 references. Its title describes a forged raised face component with a Polished finish. Confirm the actual construction and supplied records before applying those references to an equipment or process connection.
Select the PN40 construction and facing
Choose the intended flange type and obtain the drawing under the applicable EN 1092-1 edition. Define nominal size, raised-face height and diameter, thickness and the relevant bore or closure details. Include connection requirements specific to that type instead of assuming the facing description identifies the whole component.
Check the full bolt pattern against the mating equipment. The table lists four half-inch holes, but this drilling needs verification for the selected design. A broad 1/2–120 inch range is shared by several materials and types; confirm the actual required combination and its applicable standard scope.
Verify grade 321 and surface acceptance
Request the supplied material designation, condition, traceability and required production inspections supporting grade 321. Generic Stainless Steel and separate Alloy Steel choices do not establish those records. PN40 also requires material-dependent pressure-temperature assessment rather than treatment as one universal allowable operating pressure.
Define the measured finish and inspection requirements for the raised face and other relevant surfaces. Polished does not provide roughness values or demonstrate hygienic design, cleanability validation or regulatory approval. Forged wording likewise needs the actual records required by the purchase specification.
Connect the flange with process and cleaning duty
Describe process fluids, cleaning chemicals, contamination controls, pressure, temperature and operating or cleaning cycles. Review the selected material and joint under the equipment acceptance requirements without assuming a sanitary approval or corrosion guarantee. Agree material, dimensional and surface records, marking, preservation, quantity, availability and delivery for the actual ordered design.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
