Cold-Rolled Steel Tube for Bearing Rings
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
InvoicingBy Actual WeightOiled or Non-oiledNon-oiled
-
Section ShapeRoundSurface TreatmentCold Rolled
-
Tolerance±1%Alloy Or NotNon-Alloy
-
ApplicationFluid Pipe, Drill Pipe, Hydraulic Pipe, Gas Pipe, Oil PipeCertificateAPI , ISO 9001
-
Delivery Time8 ~ 14 daysGradestainless steel
-
Outer Diameter219 - 1066 mm(8.62-41.97in)Special PipeAPI Pipe, Other, EMT Pipe, Thick Wall Pipe
-
StandardASTMTechniqueERW
This cold-rolled steel tube listing targets bearing-ring components with seamless and high-tensile-strength references. The table instead records ERW and mixed material classifications. Confirm actual grade, construction and component acceptance before selecting stock or treating the title as evidence of bearing material performance.
Verify material and tensile-property records
Request the supplied specification, grade, condition, traceability and material inspections to resolve the Non-Alloy and stainless steel entries. Establish seamless or ERW production from actual manufacturing records. Cold Rolled does not settle initial construction or identify a hardness or heat-treatment condition for the supplied stock.
High Tensile Strength gives no numerical value, test condition or bearing acceptance criterion. Define the material and mechanical requirements for the intended ring and obtain the relevant supplied records. The original image supports round tube forms but cannot demonstrate tensile properties, fatigue life or suitability for a finished bearing component.
Approve stock dimensions against the ring drawing
The options provide a 6–20 mm thickness range with 6 m or 12 m lengths. Specify actual outside diameter, bore, wall and length with straightness and roundness requirements. The 219–1066 mm diameter range and ±1% entry need actual values, dimensional scope and accepted measurement criteria.
Use the approved component drawing to define machining allowance, required finish and mating geometry. Confirm Non-oiled surface condition and preservation. Identify the ASTM number, edition and product scope for the order; API and ISO 9001 labels do not qualify bearing material or establish supplied-product conformity without the relevant documentation.
Set the bearing-component mechanical acceptance
Describe ring function, loads, cycles, environment and processing requirements. Evaluate the confirmed material, route, dimensions and surface package against that duty. Agree material and dimensional inspections, surface checks, mechanical tests and explicit acceptance criteria, then confirm records, marking, protection and delivery before approving the stock for the component project.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
