Carbon Steel Butt-Weld 180-Degree Pipe Elbow Enquiry
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 yearcustomized supportOEM, ODM, OBM
-
model number5TechnicCasting
-
ConnectivityWeldingshapeEqual
-
head codeHexagonOverall Length4 in
-
Height6Surface TreatmentPainting
-
PressureLow PressureSystem of Measurementinch
-
Mounting hole diameter0.25 inPipe FeaturesFlexible
-
Pipe ClassNot RatedApplicationAgricultural Irrigation, Automotive Repair, Heating Systems
-
SizeCustomized SizeProduct nameElbow
This pipe elbow enquiry addresses a 180-degree butt-weld return requirement between pipe legs. Define the return geometry, material and required construction before evaluating the configuration. A return drawing should describe both ends and their relationship to the installation, rather than relying on a nominal size or a general image of curved fittings.
Draw the return and both pipe legs
Show the incoming and returning pipe centerlines, their spacing and the required direction of the bend. Identify the centerline radius, overall envelope and the dimensions of both ends. Confirm the actual return angle on the selected drawing. These details let the enquiry address the installation clearance and pipe alignment without assuming that every elbow shown in a gallery has the required return shape.
Confirm construction and butt-weld preparation
State whether the project requires one return component or an approved assembly, then obtain confirmation of the actual proposed construction. Specify the butt-weld preparation, end diameters and walls for both connections. Request the governing dimensional standard and material specification for that configuration. Carbon Steel, Stainless Steel and Alloy choices need separate exact material definitions; appearance cannot establish the composition or construction of the selected part.
Assess the return as one selected configuration
Include the medium, design pressure and temperature with the pipe layout and joining requirements. Request the documentation needed to evaluate the selected material, wall and return construction together. A qualitative pressure label does not define an operating envelope, and a size selector does not establish the spacing between the legs. Before accepting the return, confirm the complete drawing and service scope against the project requirements. Record any change to radius, end preparation or construction on that same drawing so its effect on the installation can be reviewed.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
