Carbon Steel Welded Tee for Oil and Water
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
warranty1 Yearcustomized supportOEM
-
TechnicFORGEDConnectivityWelding
-
shapeEqualhead codeHexagon
-
Overall LengthCustomized SizeHeightCustomized Size
-
Surface TreatmentPlainPressureHigh Pressure
-
System of MeasurementMetricMounting hole diameterCustomized Size
-
Pipe FeaturesCustomized SizePipe ClassCarbon Steel
-
ApplicationShipbuilding, Oil Field, Offshore, Water System, Natural GasThread TypesCustomized Size
Specify the branch connection needed for this carbon-steel ASME B16.9 tee enquiry. Straight/Reducing and the half-inch title reference require confirmation against the actual supplied fitting. The branched reference image helps discuss configuration; photographic proportions cannot establish size, grade, production or performance.
Define the required run and branch combination
For the requested straight or reducing arrangement, list each run and branch end diameter, branch angle, center-to-end lengths, wall/end thickness, preparation and tolerances. Resolve Equal and Hexagon table wording through an approved drawing of the component being quoted.
Two recorded choices share one 1/2-to-110-inch label with Carbon Steel or a234wpb material wording. Obtain confirmation of individual half-inch supply rather than assuming every size in that label is available. Clarify nominal versus measured dimensions and Metric notation. Customized length, height, holes, features and thread entries need individual definitions where applicable.
Document the body route and joining requirements
Identify the B16.9 document, edition and relevant component requirements. Specify full material designation, grade, condition and traceability; generic Carbon Steel and a234wpb choices do not themselves certify conformity.
Describe the body manufacturing route separately from Welding installation attachment. FORGED and welded references need accepted production and inspection evidence before interpreting body construction. Agree Plain surface condition, end preparation and supplied tolerances without inferring corrosion resistance.
Supply an oil or water operating basis
High Pressure is not a numerical rating; Carbon Steel under Pipe Class provides material wording. State medium, pressure, temperature, cycling, external loads and connected pipe/joint conditions. Listed shipbuilding, oil-field, offshore and natural-gas contexts also need application acceptance. Establish material/manufacturing/dimensional and joint inspection, installation, marking, confirmed size availability, OEM scope and applicable one-year warranty terms.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
