Class 150 Carbon Steel Flange Olet for Equipment
産業調達向け
明確なRFQを準備
RELIAが部品内容を理解し、次のステップを協議できるよう、以下をご提示ください。
- 図面、サンプル、または参照規格
- 材質グレードと希望製法
- 寸法、公差、表面処理
- 用途、予定数量、納入先
製造納期、梱包、出荷条件は、仕様と取引条件の合意後に案件ごとに確定します。
-
Surface TreatmentPolishedApplicationIndustrial Equipment
-
Bolt Hole Diameter1/2"Bolt Hole Quantity4
This Class 150 carbon steel flange olet enquiry concerns polished industrial equipment connections. The title names a flange olet, but the catalogue offers generic flange types without a separate branch-outlet selection. Obtain confirmation of the intended construction before choosing an option or issuing an order.
Resolve the flange olet and branch arrangement
Ask whether the supplier proposes a branch outlet, a conventional flange or another documented assembly. Where a branch is intended, specify run and branch nominal sizes, orientation, attachment detail, bore, wall thickness and branch dimensions. Request the complete approved drawing rather than deriving geometry from a generic type label.
The four material groups and nine flange types are alternatives. Carbon steel choices do not establish that every type meets the title application. The shared half-inch-to-120-inch range likewise provides no selected size or evidence that each standard covers every offered combination.
Assign the title standards and four-hole drilling
Confirm the governing documents, editions, applicable configuration and any required series. The combined ASME B16.9/B16.47 and ASTM A105/A403 references need allocation to the actual item; they are not a single blanket certification. Obtain the full material designation, condition, traceability, certificates and forging records.
The table lists a half-inch bolt hole diameter and four holes. Clarify the title half-inch reference before treating it as nominal pipe size. Check the selected bolt circle, drilling, facing, flange thickness and outside diameter against the mating equipment, and agree acceptance of the polished surface.
Check the Class 150 equipment assembly
Class 150 alone does not define operating pressure. Provide medium, pressure, temperature, corrosion conditions, cycling and loads for approval. Agree branch attachment or welding, matching components, support, alignment, inspection, marking, documentation and quotation scope for the accepted construction.
すべての製品照会に必要な技術情報
製品の最終確認前に要件を整理します。
製品ページは出発点です。在庫適合や特注生産の確定前に、図面、サンプル、接続、材質、数量、受入要件を確認します。
案件の条件に沿ってこの製品を検討します。
現在の図面、サンプル、参照品、数量、用途情報をお送りください。不明点は未確定のまま検討できます。
